Description


Polymer Latex Additive for Polymer Modified Concrete/Mortar/Grouts
Monobond® is a polymer latex additive for modifying cement concrete / mortar / plaster / grouts. The addition of Monobond® improves mechanical properties especially flexure and tension. Due to low permeability of polymermodified systems, remarkable improvement in prevention of carbonation, chloride ion penetration is observed. Also chemical resistance improves significantly.
The addition of Monobond® imparts resilience to the cement matrix. Thereby improving impact resistance. Also the modified cement matrix cures in air, eliminating the necessity of wet curing. It is necessary to mix Monobond® in water first prior to addition in cement mortar/concrete.

*For Further Details Chat with our Marketing Executive.


Uses


To make excellent polymer modified repairmortar/concrete for distressed RCC structures. Also as an additive to cement grout and bonding coat.

Description


EPCO®KP-350 + EPCO®HP-350 epoxy
Mortar is a three-component system with nonshrink and high mechanical strength properties.


Uses


  • Epoxy screed industrial flooring application.
  • Corrosion damaged structures.
  • Honeycombed zones of structural elements.
  • Impact resistant topping.
  • Chemical resistant lining.
  • Dilapidated RCC structures.
  • *For Further Details Chat with our Marketing Executive.

    Description


    Molith®PMM
    is a ready to use single component cementitious polymer modified mortar for repairing concrete structures.


    Uses


    In damaged concrete structures Molith®PMM can be used to make up for the lost section of concrete such as concrete cover over reinforcement, portion damaged due to corrosion etc. It can be used to patch up holes in industrial floors. It is also useful in precast concrete elements for repairing damaged patches, corners during demoulding or during erection.

    *For Further Details Chat with our Marketing Executive.

    Description


    3 component epoxy mortar with non shrink & highmechanical strength properties


    Uses


    Repairs of dilapidated RCC, corrosion damagedstructures, honeycombed zones of structuralelements, impact resistant toppings, chemicalresistant lining.

    Description


    3 component epoxy mortar fast setting system withhigh mechanical strength properties


    Uses


    Repairs to pier foundations in tidal zones and roadswhere open time required is short.

    Description


    Ready to use free flow microconcrete.


    Uses


    Repairs of slabs, beams, columns of buildings,basements. Repairs of foundations, marine structures,bridge decks, piers, cooling towers & chimneys. Forlarge pockets in machine base plates, cranes & transporter rails, steel rolling mill beds etc.

    Description


    Single component ready-to-use polymer modifiedmortar for reoair & rehabilitation of concreteStructureS.


    Uses


    Used in damaged concrete structures to make up forthe lost section of concrete such as concrete coverover reinforcement, portion damaged due tocorroston etc.

    Description


    Thixotropic spray mortar


    Uses


    As sprayed mortar for rehabilitation of jetties, slabs,tun nels.

    Description


    Concentrate for preparation of non shrink free flowmicro concrete.


    Uses


    Jacketing of beams, columns, slabs, marine structures,bridge decks etc.

    Description


    Non shrinkfree flow high strength microconcrete forunderwater application.


    Uses


    In repairs of bridges, dams, concrete pillings, tidalzones erc